Emergency Stop - Magicfx FX-ARM CONTROLLER User And Installation Manual

EMERGENCY STOP

3.3
NOTICE
1 Press the e-stop button in.
The illuminated e-stop button will turn off.
The FX LED indicator turns off and the e-stop reset button turns on.
2 Set the keyswitch in the 'OFF' position.
3 Wait for danger to be averted, then reset the arm controller by the following
steps.
4 Release the e-stop with a clockwise quarter turn.
The e-stop reset button will be illuminated white.
FX-ARM CONTROLLER — User and Installation Manual
®
12 MAGICFX
With the key switch in the 'ON' position the e-stop should be
illuminated and the FX LED Indicator Red.