Magicfx FX-ARM CONTROLLER User And Installation Manual page 9

4 Connect the other end to a power outlet.
5
Connect the FX-machines to the controller with Arm cables, either by a direct
cable or daisy chain configuration.
ARM
NOTICE
WARNING
POWER
®
The MAGICFX FX-ARM CONTROLLER can be placed either at the
end of the safety cable line or anywhere within a linked system
using the Arm Input and output connectors on the machines.
Only one MAGICFX
linked system.
Only one MAGICFX
single connected system. Connecting more than one controller
with RJ45 Arm leads can cause damage to them.
FX-ARM CONTROLLER — User and Installation Manual
®
MAGICFX
PowerCon TRUE1 female
EtherCON
®
FX-ARM CONTROLLER can be used in a
® FX-ARM CONTROLLER can be used in a
POWER IN
ARM IN ARM OUT
9