Table of Contents
Advertisement
The FPX6000 is installed in the VESA mounting bracket. Refer to section 8.0,
ing Cables"
on page 9.
Do the following to install up to two devices in a 19-inch rack using the rack-mounting
bracket (see
figure
1. Remove 4 screws from below the rear panel as shown in
Figure 6.
2. Use 4 mounting screws included with the bracket to secure the FPX6000 front panel
to the bracket at one of the mounting locations on the rack-mounting bracket (see
figure 7
on page 8).
FPX6000 Quick Start Guide
5.0 Installing into a 19-inch Rack
5):
Figure 5.
Removing the 4 screws from the underside of the device
Rack-mounting bracket
figure
6.
"Install-
7
Advertisement
Table of Contents
