Patton FiberPlex FPX6000 Series Quick Start Manual page 13

LEDs/Ports
Green: Power is detected
Power
Off: Power is not detected
Green: Indicates the CODEC is active
CODEC
Off: CODEC is not active
Solid Green: All OK
Amber: Booting up, awaiting sync
System
Red: System failed to boot correctly
Off: No power
Solid Green: Dante network clock slave, sync achieved
Blinking Green: Dante Network clock master
Sync Amber: Syncing in progress
Red: Error achieving sync
Off: No Power
Solid Green: Software running
Blinking Green: Identify function activated
Error
Solid or Blinking Red: Software fault or exception
Off: No power
Solid Green: Non-HDCP unprotected video sync or source detected
Blinking Green: HDCP protected content detected
Solid Red: Invalid non-HDCP video sync or source
HDCP
Blinking Red: Failed HDCP negotiation
Blinking Amber: HDCP negotiation in progress
Off: No power
Refer to section 10.0
10.0 Installing the Dante Controller Software
Supported Platforms:
Windows 10 (Windows 11 is not currently supported).
•
macOS 11 Big Sur, macOS 10.15 Catalina or macOS 10.14 Mojave (macOS 12 Mon-
•
terey is not currently supported).
All operating systems should be updated to the latest supported version.
FPX6000 Quick Start Guide
Table 1. Front panel ports and LED descriptions
"Installing the Dante Controller
Description
Software".
13