Table of Contents
Advertisement
If you do not already have a designated Dante Network Clock, Dante Controller
will choose one from the available Dante devices. This process is automatic.
4. Locate the desired FPX6000T Unit Name in the transmit channel at the top of Dante
Controller grid, then click the "+" sign next to the Unit Name. The "+" changes to a
"–" as it displays the transmitter's signal receiving capabilities (see
examples highlighted in red squares).
Figure 14.
5. Locate the FPX6000R in the receive channel on the left-hand side of the Dante Con-
troller, then click the "+" sign next to the Unit Name to display the receiver's signal
receiving capabilities (see
Figure 15.
FPX6000 Quick Start Guide
Displaying FPX6000T signal sending capabilities
figure
15).
Displaying FPX6000R signal receiving capabilities
figure 14
for
17
Advertisement
Table of Contents
