Table of Contents
Advertisement
Installing Optional Media
Installing Optional Driftwood Log Set (PL60VO)
[LGS59 x2]
The PL60VO has the option of installing a driftwood log set. Once the
firestones or speckled stones have been installed the log set can be
installed.
Ensure logs are securely placed and will not tip or fall. Remove media
where logs touch the burner tray to ensure a more secure position.
Driftwood logset MUST be installed with Firestone, Fireglass or Speckled
Stone media as a base.
2
3
1
Figure 76.a
Step 1. Place Log 6 in the left back corner of the burner tray. Ensure log
does not cover pilot. See Figure 76.b
6
2
Step 2. Place Log 5 to the right of log 6 at the back of the media tray.
Figure 76.c
2
Page 28
5
4
6
LGS59x2
Figure 76.b
5
5
Figure 76.c
Step 3. Place Log 1 resting diagonally against the front of the media tray.
See Figure 76.d
Step 4. Log 1 is placed in the back center of the media tray. See Figure
76.e
Step 5. Place Log 2 resting diagonally against log 1, with the thinner end
pointing into the top right corner of the firebox. See Figure 76.f
Step 6. Log 4 is placed in the back of the media tray between logs 2 and
5. See Figure 76.g
4
Installation
1
Figure 76.d
1
Figure 76.e
2
Figure 76.f
Figure 76.g
XG0219 - 170829
Advertisement
Table of Contents
Troubleshooting
