Montigo PL60VO Installation & Maintenance Manual page 21

LED Strip Installation (Optional Accessory)
LED Strip Instructions
Power to the unit MUST be disconnected before installing
For instructions on how to remove the door please see the door
install/removal section.
Figure 49
1. Unscrew the 4 screws securing the media tray to the burner.
Figure 50
2. Remove the pilot cover from the burner tray.
Figure 51
3. The tray can now be removed from the firebox.
XG0219 - 170829
Removing the media tray
Removing the pilot cover
Firebox with tray removed
Figure 52
4. Loosen the 3 bolts securing the baffle to the back of the firebox.
Figure 53
5. Place LED air baffle resting on the existing air baffle.
Figure 54
6. Install the LED strip baffle onto the bolts and tighten.
Figure 55
Connecting power
7. Connect the white power connector from the LED strip to the
connector in the right side of the firebox.
Installation
Loosening air baffle bolts
Adding LED air baffle
Installing LED air baffle
Figure 56
connected power
Page 21