Advertisement
B
B
Step 18.
Hand tighten all cam locks (H),
this will expand cam dowels (W)
and tighten the unit together.
M
H
B
View from underside
For Internal Use: FI.WR.INS.014_WKIN0062_Walkin_Tower_Guide_Rev13
Step 17.
Secure back panel (D) to end panel (B) at the
B
bottom. Use 4 x15mm screws (L) to 1 x L bracket
B
LGE as shown.
D
Step 19.
Secure tower to the wall using
L brackets LGE.
Use 2 x 15mm screws (L) to
secure each of the
L brackets LGE to the units
at either side. Then screw
through into the wall as
shown.
Screws for fixing to walls
are not provided as these
vary depending on your wall
material and construction.
Ensure appropriate fixings for
wall constructions are used.
L
L
Page 6
Advertisement
