Page 1
TOWER UNIT 2070 & 2250 Walk In Tower Assembly Guide 2070 - 2250 x600 1 Door 70/30 Door 50/50 Door For Internal Use: FI.WR.INS.014_WKIN0062_Walkin_Tower_Guide_Rev13...
Page 2
TOWER UNIT 2070 & 2250 Walk In Tower Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED 1Dr OPTION 70/30 OPTION 50/50 OPTION Panel A Panel B...
Page 3
Step 2. Step 1. Seat dowel (F) into Seat cam dowel (W) into holes in end panel (A) holes in end panel (A) as as shown. Seat (W) cam dowel shown. into hole as shown. From Top Step 3. Attach panels (sM) and (sE) to end panel (A), using cam dowel (W) (in blue) and also using Do not use power tools with dowels (F) (in orange) in positions as shown.
Page 4
TOWER UNIT 2070 & 2250 Walk In Tower Assembly Guide Step 5. Seat 10x dowels (F) into holes in both panels (sM) and (sE) as shown. Step 6. Slide back panel (C) into groove of end panel (A). Also insert dowels (F) (in orange) from panels (sM) and (sE) into the required holes in back panel (C).
Page 5
Step 11 Step 10. Seat cam dowel (W) into Seat dowel (F) into holes in holes in end panel (B) as end panel (B) as shown. Seat (W) shown. cam dowel into hole as shown. From Top Step 12. Attach end panel (B) to panels (sM) and (sE) using cam dowel (W) (in blue) and also using dowels (F) (in orange) in positions as shown.
Page 6
TOWER UNIT 2070 & 2250 Walk In Tower Assembly Guide Step 14. Seat 10x dowels (F) into holes in both panels (sM) and (sE) as shown. Step 15. Secure back panel (D) to panels (sE) and (sM) and back panel (C). Use 20 x 45mm screws (K) as shown.
Page 7
Step 17. Secure back panel (D) to end panel (B) at the bottom. Use 4 x15mm screws (L) to 1 x L bracket LGE as shown. Step 18. Hand tighten all cam locks (H), this will expand cam dowels (W) and tighten the unit together.
Page 8
TOWER UNIT 2070 & 2250 Walk In Tower Assembly Guide Step 20. Attach hinge plates onto end panel (A) or (B) to suit as shown using 2 screws already positioned within the hinge plate. Hinge side or sides to be mounted in accordance to Customer Specific Kitchen Plan.
Page 9
Step 20. Attach hinge plates onto end panel (A) or (B) to suit as shown using 2 screws already positioned within the hinge plate. Hinge side or sides to be mounted in accordance to Customer Specific Kitchen Plan. 2250 2250 70/30 50/50 HINGE...
Page 10
TOWER UNIT 2070 & 2250 Walk In Tower Assembly Guide Step 20. Attach hinge plates onto end panel (A) or (B) to suit as shown using 2 screws already positioned within the hinge plate. Hinge side or sides to be mounted in accordance to Customer Specific Kitchen Plan.
Page 11
Door Frontal Fixing (Where Applicable) Infinity + Doors Supplied in accordance to 50/50 & 70/30 1DOOR OPTION customer specific kitchen plan OPTIONS Fixing plate Step 1. Insert hinge into hinge holes provided, in accordance with customers plan. Step 2. Align doors & frontal plinth to join together using fixing plates (U) to the back of both frontals.
Page 12
TOWER UNIT 2070 & 2250 Walk In Tower Assembly Guide Door Frontal Fixing (Where Applicable) Infinity Doors supplied in accordance to 50/50 & 70/30 1DOOR OPTION customer specific kitchen plan OPTIONS Fixing plate Step 1. Insert hinge into hinge holes provided, in accordance with customers plan.