Installation Instructions - Advantech PCI-1713U User Manual

2.3 Installation Instructions

The PCI-1713U can be installed in any PCI slot in the computer. How-
ever, refer to the computer user's manual to avoid any mistakes and dan-
ger before you follow the installation procedure below:
1. Turn off your computer and any accessories connected to the computer.
Warning!TURN OFF your computer power supply whenever you
install or remove any card, or connect and disconnect cables.
2. Disconnect the power cord /other cables from the back of the computer.
3. Remove the cover of the computer.
4. Select an empty +5 V PCI slot. Remove the screw that secures the
expansion slot cover to the system unit. Save the screw to secure the
interface card retaining bracket.
5. Carefully grasp the upper edge of the PCI-1713U. Align the hole in the
retaining bracket with the hole on the expansion slot and align the gold
striped edge connector with the expansion slot socket. Press the card
into the socket gently but firmly. Make sure the card fits the slot
tightly.
6. Secure the PCI-1713U by screwing the mounting bracket to the back
panel of the computer.
7. Attach any accessories (D-type cable, terminal board, etc.) to the card.
8. Replace the cover of your computer. Reconnect any cables.
9. Turn the computer power on.
9 Chapter 2