Toshiba nv Series Instruction Manual page 77

Hide thumbs Also See for nv Series:

Table of Contents

4.3.3

Tool mode

The tool mode is for nV-Tool to authenticate with an authentication server. In the

tool mode, you can edit the authentication client configuration information file

and display the authentication status of the authentication server. However,

since there is no function to automatically detect the authentication server, the

authentication status will be displayed according to the judgment of nV-Tool.

The following figure shows each part of the authentication screen of the tool

mode.

(9)Edit

(3)Password

(4)Notification

(2)User ID

(6)Register

(5)UCS selection

(7)Delete

(8)UCS status

(10)Update

Figure4.14.

Authentication screen (Tool mode)

The (10)Update button is added as a difference from the automatic

authentication mode. When the edit mode is "Enable", editing of the

authentication client setting information file becomes enable, at this time it is the

same as the setting mode. When the edit mode is "Disable", the authentication

status of the authentication server is displayed in the UCS selection and the

UCS status. The following (5), (8), (10) indicate the display contents when the

edit mode is "Disable".

Unified Controller nv series Secure System Instruction Manual

Table of Contents