Authentication - Toshiba nv Series Instruction Manual

Chapter 4 Security Function
4.2

Authentication

Authentication is performed between the authentication server and the
authentication clients.
The authentication server is UCS.
The authentication clients are OIS, SVR, EWS and nV-Tool.
The process of authentication is described below.
1. The authentication client requests authentication to the authentication server
2. The authentication server collates the user ID and password and responds to
3. The authentication server permits communication (eg tag access) with the
4.2.1 Setting of the authentication server
Set the authentication server so that it can communicate with authorized clients.
Important
To set up or change (DL) the authentication server, the authority of the administrator described
in this section is required.
Set up an appropriate person to the administrator who is responsible for setting up and
changing (DL) authentication server (security information).
This setting must comply with your security policy.
Set the authentication server in [Authentication management] window of nV-Tool.
The setting is possible for administrator or user with editing authority of nV-Tool.
Select a system at left bottom of the [Product Tree] and select <Authentication
management> of <Controller security> from the <File> menu.
42
6F8C1865
with the user ID and password.
the authorized authentication client.
authentication client after completion of authentication.
Authentication
client
Figure4.3.
1.REQUEST
Authentication
2.RESPOND
3.COMMUNICATE
Process of authentication(1)
server