Toshiba nv Series Instruction Manual page 74

Hide thumbs Also See for nv Series:

Table of Contents

Chapter 4 Security Function

Note

Authentication will be attempted automatically regardless of the edit mode area "Enable /

Disable".

When the edit mode area is "Disable", the authentication status with the

authentication server is displayed in the UCS selection area and the UCS status

area. The following (5) and (8) indicate the display contents when the edit mode

area is "Disable".

(5) UCS selection

6F8C1865

Select UCS (authentication server) to set the password. After selecting,

press the Password button to make the setting. The meaning of the display

characters is as follows.

UCS*(?)

Controller number (1-64)

P or S

(P) represents the primary in the duplex station, and (S) represents the

secondary in the duplex station. In the case of a single station, (P)

represents it. In the case of the duplex station, since the password is

common between the primary and the secondary, select either.

The meaning of the display color is shown below. The display color is

updated automatically.

Table of Contents