Toshiba nv Series Instruction Manual page 69

4.3.1 Setting mode
The setting mode is for setting the authentication client setting information file in
the OIS / SVR / EWS station. In the OIS / SVR / EWS station, the authentication
screen is started in the setting mode for the first time.
The following figure shows each part of the authentication screen of the setting
mode.
(2)User ID
(5)UCS selection
Figure4.10.
(1) Start-up mode
Set the operation mode at next startup.
Automatic:
Setting:
(2) User ID
The user ID of the authentication client is displayed in this area. The user ID
of the authentication client is the same as the Windows sign in user ID.
(1)Start-up mode
(3)Password
(8)UCS status
Authentication screen (Setting mode)
Automatic authentication mode
Setting mode
Unified Controller nv series Secure System Instruction Manual
(4)Notification
(6)Register
(7)Delete
53