Toshiba nv Series Instruction Manual page 10

6. Checking the Warning Label on the Main Body
Check that warning label is attached on the main body.
If the label is missing or hard to read due to stain, contact one of Toshiba sales representatives.
[Warning symbols on the nv series main body]
This symbol is a warning symbol for dangerous parts. It is attached on places
where there is a risk of an electric shock or a risk of damage to the main body due
to wrong wiring.
Note the following where this symbol is present.
● Touching the power input terminal of the power supply module while the power is on
causes an electric shock and is very dangerous.
Do not touch the power input terminal.
● For safety, turn off the power before wiring or performing maintenance and inspection.
● Wire the power input terminal correctly, and avoid applying any voltage exceeding the
specified voltage range. Failure to observe this may cause failure or damage.
● Be careful not to short-circuit the connector pins with the connector cover.
viii
6E8C1865