Connecting The Appliance To The Home Connect App; Activating Wi-Fi On The Appliance; Deactivating Wi-Fi On The Appliance; Resetting The Appliance Network Settings - Siemens WM14VKH0CS User Manual And Installation Instructions

In the Home Connect app, enter
6.
the network name (SSID) and
password (key) for your home net-
work.
Carry out the steps in the
7.
Home Connect app to connect the
appliance.
a If the display shows and
up permanently, the appliance is
connected to the Wi-Fi home net-
work.
If the appliance is not connected
8.
to the Wi-Fi home network, the dis-
play shows Err .
Check whether the appliance is
‒
within the range of the Wi-Fi
home network.
Reconnect the appliance to the
‒
Wi-Fi home network with WPS
function.
Connect the appliance to the
9.
Home Connect app → Page 37.
16.3 Connecting the appli-
ance to the Home Con-
nect app
Requirements
¡ The appliance is connected to the
WLAN home network (Wi-Fi).
¡ The Home Connect app is open
and you have logged on.
Set the programme to position 3.
1.
a The display shows APP.
Press start/doplnění
2.
a The appliance connects to the
Home Connect app.
Once your appliance is displayed
3.
in the Home Connect app, carry
out the last steps in the
Home Connect app.
a If the display shows , the appliance
is connected to the Home Connect
app.
lights
a The display shows Con.
a Wi-Fi is activated.
a The display shows Con.
a Wi-Fi is deactivated.
.
a The display shows rES.
a The display shows YES .
a The network settings are reset.
16.4 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold vzdálený start
1.
for approx. 3 seconds.
Set the programme to position 4.
2.
Press start/doplnění
3.
until the display shows On.
Note: If Wi-Fi is activated, the appli-
ance will not switch itself off automat-
ically.
16.5 Deactivating Wi-Fi on the
appliance
Press and hold vzdálený start
1.
for at least three seconds.
Set the programme to position 4.
2.
Press start/doplnění
3.
until the display shows OFF.
Note: The connection is automatically
re-established when the Wi-Fi is
switched back on.
16.6 Resetting the appliance
network settings
Press and hold vzdálený start
1.
for at least 3 seconds.
Set the programme to position 5.
2.
Press start/doplnění
3.
Press start/doplnění
4.
Home Connect en
repeatedly
repeatedly
.
.
37