Setting Up The Wiring Closet; Controlling The Temperature - Extreme Networks ExtremeSwitching 5420 Series Hardware Installation Manual

Setting up the Wiring Closet

Table 9: Authorities on Electrical Codes (continued)
Organization
National Electrical Manufacturing Association (NEMA)
(USA only)
Organization of electrical product manufacturers.
Members develop consensus standards for cables,
wiring, and electrical components.
Electronic Components Industry Association (ECIA)
Trade association that develops technical standards,
disseminates marketing data, and maintains contact
with government agencies in matters relating to the
electronics industry.
Federal Communications Commission (FCC) (USA only)
Commission that regulates all interstate and foreign
electrical communication systems that originate in the
United States according to the Communications Act
of1934. The FCC regulates all U.S. telephone and cable
systems.
Setting up the Wiring Closet
Be aware of the following recommendations for your wiring closet:
•
Make sure that your system is easily accessible for installation and service. See
and Recommendations
•
Use appropriate AC or DC power, power distribution, and grounding for your specific installation.
•
Use a vinyl floor covering in your wiring closet. (Concrete floors accumulate dust, and carpets can
cause static electricity.)
•
Prevent unauthorized access to wiring closets by providing door locks. Install the equipment in a
secured, enclosed, and restricted access location, ensuring that only qualified service personnel have
access to the equipment.
•
Provide adequate overhead lighting for easy maintenance.
•
Be sure that each wiring closet has a suitable ground. All equipment racks and equipment installed
in the closet should be grounded.
•
Be sure that all system environmental requirements are met, such as ambient temperature and
humidity.
Note
Consult an electrical contractor for commercial building and wiring specifications.

Controlling the Temperature

Extreme Networks equipment generates a significant amount of heat. It is essential that you provide a
temperature-controlled environment for both performance and safety.
Install the equipment only in a temperature- and humidity-controlled indoor area that is free of airborne
materials that can conduct electricity. Too much humidity can cause a fire. Too little humidity can
produce electrical shock and fire.
36 ExtremeSwitching 5420 Series Hardware Installation Guide
on page 38 for more information.
Address Web Site URL
NEMA www.nema.org
1300 N. 17th Street
Rosslyn, VA 22209
USA
ECIA www.ecianow.org
111 Alderman Drive
Suite 400
Alpharetta, GA 30005
USA
FCC www.fcc.gov
445 12th Street S.W.
Washington, DC 20554
USA
Rack Specifications
Site Preparation