Glass, Frames And Mechanisms; Heated Windshield And Heated Rear Window; Rear Windows - Ford TRANSIT CUSTOM 2012.75 Mounting Manual

Body and equipment mounting manual
Table of Contents

Advertisement

5.8 Glass, Frames and Mechanisms

5.8.1 Heated Windshield and Heated
Rear Window
WARNING: The base system should not
be tampered with (controlled by body
control module and multiplex
architecture) and no feeds taken from
the associated wiring or controller.
These options are not suitable for aftermarket or
Vehicle Converter fit.
NOTE: For further information please contact
your local National Sales Company representative,
or Local Ford Dealer. If they are unable to help you
then please contact the Vehicle Converter
Advisory Service at VCAS@ford.com
Item
A
L1 = 3.0m wheel base, H1 = Low Roof
B
L2 = 3.3m wheel base, H1 = Low Roof
FORD TRANSIT CUSTOM 2012.75

5.8.2 Rear Windows

For windows, it is recommended to specify the
base vehicle as a Kombi or Bus body - however,
when converting a van, the following should be
adhered to:
• Cut the outer panel of the body side and door
to within 1mm of the inner panel flange.
• Do not cut across panel joints or pillars.
• Use approved glass for installation according
to legal requirements.
WARNING: For rear seat installation
Refer to: 5.7 Seats (page 166).
Description
Date of Publication: 04/2012
169

Advertisement

Table of Contents
loading

Table of Contents