Table of Contents
Advertisement
5.1.4 Floor 'No Drill Zones' under the Floor Fuel Tank
1
Center line Front Wheel Axle
2
3
A
B
C
5.1.5 Front End Integrity for Cooling,
Crash, Aerodynamics and Lighting
Cooling Continuous air flow through the front end
and engine compartment is not to be hindered by
adding any additional equipment. If uncertain
please consult the Vehicle Converter Advisory
Service VCAS@ford.com
Lighting Do not alter the lighting system.
Date of Publication: 04/2012
150
Floor 'No Drill Zones' Dimensions (mm)
Center of 'B'-Pillar
Center line of vehicle
1207
1182
250
D
E
F
G
H
J
Crash Do not cut, drill or weld any parts that are
load path relevant in case of crash. Do not add
material in the crash zone. This could affect the
crash sensor calibration.
The side airbag system is not permitted if:
• A swiveling device is fitted on the front seats.
• Any additional material or structure is attached
to the B-pillar inner and/or outer area.
FORD TRANSIT CUSTOM 2012.75
394
1282
680
164
1074
2464
Advertisement
Table of Contents
