Table of Contents
Advertisement
Item
A
Left Hand Drive Switch options
B
Right Hand Drive Switch options
1
Beacon
2
Water Heater*
3
Aux 1
Part of Utility Vehicle Switch Pack (A607)
4
Aux 2
Part of Utility Vehicle Switch Pack (A607)
SVO Switches and Harness Part Numbers
Harness
BK2V-14A303-A
BK2V-14A303-B
BK2V-14A303-F
* Limited availability check with your Local Ford Dealer or National Sales Company representative.
There are a combination of switch packs available
to order for specific conversions. The 'Beacon
Preparation Pack' or 'Utility Vehicle Switch Pack'
are high current latched switches that control
relays in the Auxiliary Fuse Panel. When the
switches are pressed (light on) the switches
provide a +12V/20A output.
NOTE: The Water Heater or Aux 2 switches must
have the engine running before they will give an
output. The output will be switched off during an
engine auto-off (Start-Stop vehicle). The other
switches (Beacons and Aux 1) are fed directly from
the battery. It is important to switch these off
when not required, as the battery charge level will
be depleted.
FORD TRANSIT CUSTOM 2012.75
Beacon
Water Heater*
BK2V-13768-A
BK2V-13768-A
BK2V-19H218-A_
BK2V-13768-A
Description
Aux 1 (12V)
-
-
-
-
BK2V-13D734-A_
If heavy loads are required, controlled via these
switches (especially at engine off) it is
recommended to install the High Performance
Deep Cycle AGM battery option (A736). The
switches are illuminated red when the lights are
in: side, dipped, full beam or auto lights on. They
switch +12V and can switch up to 8A directly.
Aux 2 (12V)
-
-
BK2V-13D734-B_
Date of Publication: 04/2012
137
Advertisement
Table of Contents
