Changing Vehicle Speed Maximum Setting - Ford TRANSIT CUSTOM 2012.75 Mounting Manual

• If the control switch box circuitry significantly
exceeds 2110 ohms or there is a short circuit
then RPM speed control will not be possible.
• If a PTO conversion has been attempted on a
vehicle with a non anti braking system (ABS)
then RPM speed control will fail due to vehicle
speed being registered via a transmission
speed sensor and / or the need to press the
clutch in order to put the vehicle in gear while
in RPM speed control mode.
4.8.3 Changing Vehicle Speed
Maximum Setting
The Vehicle Speed Maximum Setting can be
changed via the Integrated Diagnostic System
(IDS) menu under the following tabs: Toolbox,
Powertrain, Service, Functions, PCM. The IDS on
screen menus will guide the dealer through the
options and setup.
FORD TRANSIT CUSTOM 2012.75
Date of Publication: 04/2012
103