Cardinal Detecto C Series Operation Manual page 22

sauE – Save User Setup
v
With SETUP, SAuE displayed the current setting for the Save Setting parameter will be
shown. If the setting displayed is acceptable, press the UNITS key to save the user
settings.
Otherwise, use the TARE key to toggle between the selections and then press the UNITS
key to save it and proceed to the next parameter. The available settings are:
= The changes are saved and the scale is ready for use with the new
On
settings.
= The changes are NOT saved and the scale will continue to operate with
OFF
the previous settings.
The scale will reset and perform a lamp test. Next, the display will show the model number;
the software revision level and then the WEIGHT display will show zero weight.
16
SCALE SETUP, CONT.
8526-M260-O1 Rev C  C Series Operation