Cardinal Detecto C Series Operation Manual page 21

SLEEP – Sleep Mode
With SETUP, SLEEP displayed the current setting for the Sleep Mode function parameter
will be shown. If the setting displayed is acceptable, press the UNITS key to proceed to the
next parameter.
Otherwise, use the TARE key to toggle between the selections and then press the UNITS
key to save it and proceed to the next parameter. The available settings are:
=
If no activity occurs on scale for 30 seconds, the scale will enter Sleep
30s
Mode. The display will be blank except for a flashing cursor. To activate
the scale, press any key or add/remove weight from scale.
=
If no activity occurs on scale for 60 seconds, the scale will enter Sleep
60s
Mode. The display will be blank except for a flashing cursor. To activate
the scale, press any key or add/remove weight from scale.
=
The Sleep Mode function is disabled.
OFF
Unit – Weighing Units
With SETUP, Unit displayed the current setting for the Weighing Units parameter will be
shown. If the setting displayed is acceptable, press the UNITS key to proceed to the next
parameter.
Otherwise, use the TARE key to toggle between the selections and then press the UNITS
key to save it and proceed to the next parameter. The available settings are:
= kg (Kilograms)
<G
= Lb (Pounds)
Lb
bUrr – Beeper
With SETUP, bUrr displayed the current setting for the Beeper parameter will be shown. If
the setting displayed is acceptable, press the UNITS key to proceed to the next parameter.
Otherwise, use the TARE key to toggle between the selections and then press the UNITS
key to save it and proceed to the next parameter. The available settings are:
=
Enable Beeper
On
=
Disable Beeper
OFF
rtadd – Return Add
With SETUP, rtadd displayed the current setting for the Return Add parameter will be
shown. If the setting displayed is acceptable, press the UNITS key to proceed to the next
parameter.
Otherwise, use the TARE key to toggle between the selections and then press the UNITS
key to save it and proceed to the next parameter. The available settings are:
= The weight will to return to 0.0, then you can execute the M+
On
You can execute the M+ even if the weight did not return to 0.0
=
OFF
SCALE SETUP, CONT.
8526-M260-O1 Rev C  C Series Operation
15