GEM 639 eSyStep Operating Instructions Manual page 52

12 Specific data IO-Link (pin 6)
12.4.27 Calibration positions
The values of the factory calibration can be read out with the Calibration positions parameter.
The values are analog values of the potentiometer in the mechanical end positions of the actuator.
Index Sub- Off- Access
In- set Rights
dex
0x55 1 0 RO
2 16 RO
Description of parameter values
Index name
Calibration positions
12.4.28 Cycle counter
Switching cycles of the actuator or of the valve are counted with the Cycle counter parameter.
For a switching cycle, end position OPEN and then end position CLOSED must be detected. This also means that cycles are not
counted for a programming/initialization error.
Index Sub- Off- Access
In- set Rights
dex
0x56 1 0 R/W
2 32 RO
Description of parameter values
Index name
Cycle counter
12.4.29 Failure counter
Occurring failures and events are counted and output with the Failure counter parameter.
Index Sub- Off- Access
In- set Rights
dex
0x57 1 0 RO
2 16 RO
3 32 RO
4 48 RO
5 64 RO
6 80 RO
7 96 RO
8 112 RO
9 128 RO
Description of parameter values
Index name
Failure counter
GEMÜ 639 eSyStep
OPEN / CLOSE (Code AE)
Length Index name
12 bits Calibration
positions
12 bits
Parameter Values
Max. 0 ... 4092
Min. 0 ... 4092
Length Index name
24 bits Cycle counter
24 bits
Parameter Values
User 0 ... 16.777.215 Customer switching cycles (resettable)
Total 0 ... 16.777.215 Total of switching cycles (not resettable)
Length Index name
16 bits Failure counter
16 bits
16 bits
16 bits
16 bits
16 bits
16 bits
16 bits
16 bits
Parameter Values
Undervoltage 0 ... 65.535
Parameter Type
Max. uint:16
Min. uint:16
Read out analog value of the potentiometer for the mechan-
ical end position OPEN.
Read out analog value of the potentiometer for the mechan-
ical end position CLOSED.
Parameter Type
User uint:24
Total uint:24
Parameter Type
Undervoltage uint: 16
Temperature error uint: 16
Motor unable to uint: 16
move
Internal error uint: 16
Emergency power uint: 16
Potifail open uint: 16
Potifail close uint: 16
Overcurrent out 1 uint: 16
Overcurrent out 2 uint: 16
Number of undervoltage errors (U < 17.4 V)
52 / 67
Default Values
0 0 ... 4092
4092 0 ... 4092
Description
Default Values
0 0 ... 16.777.215
0 0 ... 16.777.215
Description
Default Values
- 0 ... 65.535
- 0 ... 65.535
- 0 ... 65.535
- 0 ... 65.535
- 0 ... 65.535
- 0 ... 65.535
- 0 ... 65.535
- 0 ... 65.535
- 0 ... 65.535
Description
www.gemu-group.com