Table of Contents
Advertisement
shading
correction
Select pixel
gain
PGC
correction
mode
Run pixel gain
correction,
PGR
store to user
area
Inquire the
status after
PGS
pixel gain
correction
Select pixel
black
PBC
correction
mode
Run pixel
black
PBR
correction,
store to user
area
Inquire the
status after
PBS
pixel black
correction
G - Saving and loading data in EEPROM
Load Setttings
LD
(from Camera
EEPROM)
Save Settings
SA
(to Camera
EEPROM)
EEPROM
EA
Current Area
No. Request.
Note: To avoid malfunction, do not attempt writing commands not shown in the above list.
CV-L107CL
PGC=[Param.]<CR><LF>
PGC?<CR><LF>
PGR=[Param.]<CR><LF>
PGR?<CR><LF>
PGS?<CR><LF>
PBC=[Param.]<CR><LF>
PBC?<CR><LF>
PBR=[Param.]<CR><LF>
PBR?<CR><LF>
PBS?<CR><LF>
LD=[Param.]<CR><LF>
SA=[Param.]<CR><LF>
EA?<CR><LF>
1=Succeeded.
2=Error 1 – Image too bright
3=Error 2 - Image too dark
4=Error 3 - Timeout error
occurred.
0=Off (Bypass)
1=Factory area
2=User area
0=Run
pixel
correction, store to user
area
1=Run flat correction, store
to user area
0=Pixel gain correction not
yet completed.
1=Succeeded
2=Error 1 – Image too bright
3=Error 2 - Image too dark
4=Error 3 - Timeout error
occurred.
0=Off (Bypass)
1=Factory area
2=User area
0=Run pixel black
correction, store to user
area
0=Pixel black correction has
not been finished yet.
1=Succeeded.
2=Error1 - Timeout error
occurred.
0=Factory area
1=User area1
2=User area2
1=User area1
2=User area2
Note the parameter 0 is
not allowed.
0=Factory area
1=User area1
2=User area2
24
Only valid for SHC=0.
gain
Store in user setting.
Store in user setting.
Latest used DATA
AREA will become
default at next
power up.
The camera returns
latest used DATA
AREA.
Advertisement
Table of Contents
