Setting The Motion Detection - Panasonic KX-HCM110A Operating Instructions Manual

Operating Instructions

2.20 Setting the Motion Detection

The Motion Detection page allows you to adjust sensitivity of the Motion Detection.
Threshold: If the threshold is set low, this function sensitively detects changes.
Sensitivity: If you set sensitivity high, amplitude of motion detection bar gets jumpy.
1.
Click [Motion Detection] on the Setup page.
2.
Click the Motion Detection bar in Threshold to set the threshold level.
3.
Click the Motion Detection bar in Sensitivity to set the sensitivity level.
4.
Click [Save] to save the settings.
• Clicking [Cancel] cancels your settings without saving changes
5.
Click [Go to Motion Detection page].
• The Motion Detection page is displayed.
Setting
Threshold
Sensitivity
Preview
Display current threshold and detection level.
• The threshold is displayed by between green and red bar.
• The detection level is displayed by between dark and light color.
Note
Setting Threshold and Sensitivity is enabled after saving, and reflect to
preview.
120
• Adjust the threshold for Motion Detection.
• If you set sensitivity high, amplitude of motion detection bar
gets jumpy.
Description