Buffering Or Transferring Images By Motion Detection Signal - Panasonic KX-HCM110A Operating Instructions Manual

2.17 Buffering or Transferring Images by Motion
Detection Signal
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
1.
Click [Trigger] on the Setup page.
2.
Click [No.] to enable buffer/transfer.
3.
Check [Enable Image Buffer/Transfer], select [Motion Detection] for trigger,
and click [Next>].
Note
• Click [Delete Buffered Images] to delete this buffered images.
• Click [Save] to save the settings.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting
Enable Image
Buffer/Transfer
• Check the box to enable the Trigger setting. Clear the box
to disable it.
[For assistance, please call: 1-800-272-7033]
Description
Operating Instructions
107