2.5
Encrypt the Camera Image in Transport Mode
The camera can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.
Click [IPsec] on the Setup page.
2.
Click Camera in the Transport column.
•
If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Set to use
Alarm Log.
(See page
123)
Set up these settings to transfer images in transport mode (see page 118).
Note
To display Alarm Log, set Alarm 1, Alarm 2 or Motion Detection for Trigger
Setting and check [Enable].
3.
Enter each parameter in the data field.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
The display shows
that the
communication is
in HTTP and any
people can access
the camera if they
have the pre-
shared key.
55