Panasonic KX-HCM110A Operating Instructions Manual page 56

Operating Instructions
Setting
Status
Pre-Shared Key
4.
Click [Save] when finished.
• New settings are saved.
5.
Click [Cancel].
• The IPsec page is displayed.
6.
Check [Use] in the IPsec column, check encoding strength, and click [Save].
Setting
IPsec
Encoding strength
56
• Check the box to use this encryption method.
• It is the key to use in the authentication of communications.
Enter the same pre-shared key as your PC.
• Enter ASCII characters for the host name (see page 168).
But [Space], ["], ['], [&], [<] and [>] are not available.
Note
If the pre-shared key leaks to a third party, it may lead to illegal
access, private information leak or interference. To protect your
security and privacy, pay attention to the following points.
• Make it known only to the specified people.
• Set it as many characters as possible.
• Change the password regularly.
• Check the box to enable IPsec features. If you clear the
box, whole IPsec features will be invalid.
• Encoding strength for IPsec can be selected. If you select
[Standard], DES or NULL is valid as an algorithm, and then
the data will become easier to be decrypted.
Description
Description