Setting The Motion Detection - Panasonic CQ-DF602U Operating Instructions Manual

4.7

Setting the Motion Detection

The Motion Detection page allows you to adjust the sensitivity of Motion Detection.
Threshold: If the threshold is set low, this function detects nearly all movements.
Sensitivity: If you set sensitivity high, the amplitude of the motion detection bar gets
jumpy.
1.
Click [Motion Detection] on the Setup page.
2.
Click the Motion Detection bar in Threshold to set the threshold level.
3.
Click the Motion Detection bar in Sensitivity to set the sensitivity level.
4.
Click [Save] to save the settings.
• Clicking [Cancel] cancels your settings without saving changes.
5.
Click [Go to Motion Detection page].
• The Motion Detection page is displayed.
Setting
Threshold
Sensitivity
Note
• The Motion Detection is disabled while zooming, panning and tilting.
• Adjusts the threshold for Motion Detection. As the
value is set lower, the sensor will detect motions of
smaller changes.
• Adjusts the sensitivity for Motion Detection. As the
value is set higher, the amplitude of the Motion
Detection bar will become greater.
Description
Operating Instructions
133