Panasonic KX-HCM110A Operating Instructions Manual page 41

Basic
(1) Network (IPv4) Configures the IPv4 network settings to connect the
(2) Network (IPv6) Configures the IPv6 network settings to connect the
(3) IPsec
(4) UPnP
(5) DynamicDNS
(6) Date and Time Sets the date and time, automatic time adjustment and
(7) Camera
(8) Audio
Account
(9) Administrator
(10) General User
Buffer/Transfer
(11) Trigger
(12) Motion
Detection
(13) Alarm Log
camera to the network (see page 43).
camera to the network (see page 48).
Enables IPsec (Transport or Tunnel mode) (see page 52).
Enables automatic port forwarding or shortcut to the
camera (see page 62).
Registers with the DynamicDNS service (see page 65).
adjust clock for daylight saving time settings (see page 70).
Sets camera name, white balance, pan/tilt range, return to
specified position and color night view settings (see page
73).
Sets output, volume, PC audio input timeout, input, camera
microphone sensitivity and mute during pan/tilt settings
(see page 78).
Sets authentication setting and administrator security (user
*1
name and password) (see page 80).
Sets general user security (user name and password) and
*1
general user's access level (see page 84).
Sets image buffer or transfer by timer or alarm or motion
detection. (See page 87, page 96 or page 107)
Sets the threshold and the sensitivity (see page 120).
Sets the information to notify the log by e-mail (see page
123).
[For assistance, please call: 1-800-272-7033]
Operating Instructions
41