Panasonic KX-HCM110A Operating Instructions Manual page 106

Petcam network camera with 2-way audio kx-hcm110a operating manual
Hide thumbs Also See for KX-HCM110A:
Table of Contents

Advertisement

Operating Instructions
11.
Click [Go to Trigger page].
The Trigger page is displayed.
Note
If you set a short interval to transfer image to a cell phone, many E-mails
may be sent to it leading to a large phone bill. Therefore, we recommend
you to set a long interval. 1 image per minute frequency is recommended.
Alarm transfer stops its operations until the camera finishes all transfers.
For example, if the camera transfers 3 images per minute and 6 images in
total, the alarm detection will be in the following operation.
If you are buffering images on the internal memory, the following
operations also delete all buffered images.
106
1st
2nd 3rd
Detectable
An alarm signal is detected.
Turning off the camera.
Saving the Date and Time page.
Restarting, updating firmware or resetting the camera to factory
default.
120 seconds
4th
5th
6th
Undetectable
Detectable

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents