Advertisement
Available languages
Available languages
HG 2000 EASY
STATIONARY USE
This tool can also be used in stationary mode.
Place the tool onto the workbench.
Secure the cable to prevent pulling the tool off
the workbench.
Carefully switch the tool on.
ΝΌΤΕ
Make sure that the nozzle always points away
from you and any bystanders.
Make sure not to drop anything into the nozzle.
COOLING DOWN
The nozzle and accessory become very hot during
use. Let them cool down before attempting to
move or store the tool.
To reduce the cooling time, switch the tool on at
f
the lowest air temperature setting and let it run
for a few minutes.
Switch the tool off and let it cool down for at
f
least 30 minutes.
MAINTENANCE AND CLEANING
ATTENTION
Before performing any work on the equipment, pull
the power plug.
MAINTENANCE
Your Power Tool has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular clea-
ning.
LUBRICATION
Your power tool requires no additional lubrication.
CLEANING
Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
CLEANING
Keep the ventilation slots of the machine clean
f
to prevent overheating of the engine.
Regularly clean the machine housing with a soft
f
cloth, preferably after each use.
Keep the ventilation slots free from dust and
f
dirt.
If the dirt does not come off use a soft cloth
f
moistened with soapy water.
ATTENTION
Never use solvents such as petrol, alcohol, am-
f
monia water, etc. These solvents may damage
the plastic parts.
TECHNICAL DATA
Article number
Voltage
Power supply
Air temperature /
Flow
41350
230 V ~ 50HZ
2000 W
I 50-450
C; 250L/min
o
II 90-600
C; 500L/min
o
WARRANTY
This product is warranted in accordance with
f
the legal/country specific regulations, effective
from the date of purchase by the first user.
This warranty covers all material or production
f
flaws. It does not include: defective parts sub-
ject to normal wear & tear, such as bearings,
brushes, cables, plugs or accessories such as dri-
lls, drill bits, saw blades etc.; damage or defects
resulting from abuse, accidents or alterations;
nor the costs for transport.
We reserve the right to reject any claim where
f
the purchase cannot be verified or when it is
clear that the product has not been properly
maintained. (Clean ventilation slots, carbon
brushers serviced regularly, ...)
Your purchase receipt must be kept as proof of
f
date of purchase.
Your appliance must be returned un-dismantled
f
to your dealer in an acceptably clean state, ac-
companied by your proof of purchase.
ENVIRONMENT
Should your appliance need replacement after ex-
tended use, do not discard it with the household
rubbish but dispose of it in an environmentally
safe way.
Waste produced by electrical machine items
should not be handled like normal household rub-
bish. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling
advice.
English | 11
www.ffgroup-tools.com
Advertisement
