Connecting To The Mains Supply - Sandstrom SJUPBL14E Instruction Manual

Connecting to the Mains Supply

• This unit is designed to operate with an AC power
• Unwind the mains adapter cable to its full length.
• Charge the internal battery for 8 hours before first
• Once the unit connected to mains socket, the main unit
SJUPBL_RE_BU_WH14E IB 170712_will.indb 27
supply or with the built-in battery.
Connect the end of the cable to the DC IN 12V
Socket at the rear of the unit and then connect
the mains adapter to the mains socket. Make sure the
mains adapter is firmly inserted into the mains socket. It
starts battery charging and the unit is now ready to use.
time use. Do not overcharge the unit. The unit will
automatically charge battery when unit connected to
mains socket, and it will automatically stop charging
once the battery fully charged.
will use mains power automatically.
GB
1A
27
12/7/2017 3:06 PM