Specifications - Sandstrom SJUPBL14E Instruction Manual

Specifications

Main Unit
SJUPBL_RE_BU_WH14E IB 170712_will.indb 45
Static Sound
Sound is distorted
Desired station
not found
No coverage in
your area or poor
reception
The display is
blank
Model
Power Consumption
Output Power
Signal reception is too low. Adjust
the aerial or move the unit to a
stronger signal location.
Volume is too high. Adjust the
volume control.
Weak signal. Search manually.
Adjust the position of the aerial.
This may occur if the broadcaster
changes the label of a service or
removes a label while tuned. The
unit will try to re-tune or perform
a scan.
SJUPBL14E /
SJUPRE14E /
SJUPBU14E /
SJUPWH14E
12 W (max.)
3 W rms
GB
45
12/7/2017 3:06 PM