Power Source; Mains Power; Connections; Using Earphones - Sandstrom S2RADB12E Instruction Manual

Power Source

Mains Power

GB
• This unit operates with a DC 12V mains
adapter (included).
• Connecting the unit to any other power
source may cause damage to the unit.
Unwind the mains adapter to its full length.
Connect the mains adapter to the DC
socket on the rear of the unit and a mains
socket. Make sure the mains adapter is fully
inserted into the mains socket. The unit is
now connected and ready to use.
• To switch the unit off completely, withdraw the mains adapter from the
mains socket.

Connections

Using Earphones

Turn down the volume before connecting the
earphones. Slowly raise the volume with the
earphones on until you reach your desired volume.
When earphones are connected, the speaker is
automatically muted.
Long-term exposure to loud music may cause hearing damage.
It is best to avoid extreme volume when using earphones,
especially for extended periods.

Playing music from an Audio Device

The AUX IN socket is located at the rear of the unit. Use a 3.5mm stereo audio
cable (not included) to connect to the audio device through the AUX IN
socket.
12
Audio Device
To the mains
socket
3.5mm Stereo
Audio Cable (Not
included)
AUX IN
PHONES
DC 12V
AUX IN
PHONES
DC 12V
AUX IN
PHONES
DC 12V