Getting Started; Dab/Fm Aerial; Mains Power; Standby Control - Sandstrom S4DABB13E Instruction Manual

Getting Started

DAB/FM Aerial

GB
Always unclip and fully extend the aerial when
listening to DAB or FM radio.
The aerial has a swivel base so can be set to different
angles for best reception.
Fully extend the aerial before connecting power for the first time.
This will ensure that the initial scan captures all stations in your area.

Mains Power

This unit is designed only to operate with the supplied AC adapter.
Connecting the radio to any other power source may damage it.
• Unwind the AC adapter cable to its full length.
• Connect the plug at the end of the
cable to the DC Socket on the back of
the radio.
• Plug the AC adapter into a mains
socket and switch the socket on (if
necessary).
The unit is now connected and ready to use.
• To switch the unit off completely, unplug
the mains adapter from the mains socket.

Standby Control

When you first connect the radio to the mains socket, the radio will be in Standby.
• Press to switch the unit on.
• Press again to switch the unit back into standby.
Disconnect the AC adapter from the mains socket if you want to switch the unit off
completely.
10
VOLUME SCROLL
MODE INFO ALARM SCAN MENU PRESET