Connecting To The Mains Supply - Sandstrom RETRO SPLDAB17 Instruction Manual

Connecting to the Mains Supply

• This unit is designed to operate with an AC power
supply or with the built-in battery.
• Connecting the unit to any other power source may
cause damage to the unit. Unwind the mains cable to
its full length. Connect the end of the cable to the DC
IN 5V socket at the rear of the unit and then connect
the mains cable to the mains socket. Make sure the
mains cable is firmly inserted into the mains socket. It
starts battery charging and the unit is now ready to use.
• Charge the internal battery for 12 hours before first time use. It will automatically charge battery when
the unit is connected to mains socket. The display will show "Charging ##" for its charging status. Once
the unit is fully charged, the display will show Mains Power.
Ensure all connections are connected before connecting to the mains
power socket.
18
RST AUX IN
DC IN-5V
To the mains socket