Planet IMG-110T User Manual page 57

Industrial 1-port rs422/485 modbus

Hide thumbs Also See for IMG-110T:

Table of Contents

User's Manual of IMG-110T

ASCII Slave Mode

This function allows the users to use Modbus TCP master device and Modbus ASCII device to achieve communication. The

operation mode of the gateway is set to ASCII Slave.

Step 1: Choose "ASCII Slave" in Channel Type.

Step 2: Press the "Modify" button to input the setting parameters.

Step 3: After setup is completed, press the "Affirm" button to take effect.

Figure 4-15: Slave ID Parameters Screen

Figure 4-16: Slave ID-ASCII Slave Screen

The virtual ID is 3~4. Offset is 2 in Channel No 1.

-57-

Table of Contents