Table of Contents
Advertisement
The page includes the following fields:
Slave ID Map Table
Channel No.
Channel Type
Channel Definition
Slave ID Range
(Virtual~~~Real)
Operate
Press
to access the following parameters screen.
The page includes the following fields:
Remote IP Address
TCP Port
Slave ID Start
Slave ID End
Slave ID Offset
Buttons
: Click to apply changes.
: Click to apply changes.
: Click to delete setting.
: Click to modify setting.
Display the channel number.
This parameter is to choose RTU Master/RTU Slave/ASCII Master/ASCII Slave
operation modes; the default mode is RTU Slave.
Display the channel definition information.
Display the Slave ID Range information.
Provide Delete and Modify button.
Figure 4-8: Slave ID Parameters Screen
Allow input the remote IP address.
This parameter is to input the TCP port and available range is 1-65535.
This parameter is to input the start Slave ID and available range is 0-247.
This parameter is to input the end Slave ID and available range is 0-247.
This parameter is to input the offset Slave ID and available range is -253-253.
-53-
User's Manual of IMG-110T
Advertisement
Table of Contents
