Cuckoo CRP-P10TOOL Manual page 52

CHECK BEFORE ASKING
FOR SERVICE
▼ If there is a problem with your cooker, check the following details before requesting service to your dealer.
Sometimes the cooker may not operate as desired if used incorrectly.
Case
When the button cannot
operate with "
When the Pressure
"Cook/Turbo" Timer
button does not operate
with " "
When the rice is badly sticky.
When " " is showed on
the LCD
When the time cannot be
preset.
When you smell after and
before cooking?
When the Lid cannot
be closed
When "tick, tick" sounds
occurs while cooking and
warming.
52
Check points
•
Is the inner pot inserted?
"
•
Check the rated voltage?
•
Did you turn the Lock/Unlock Handle
to "Lock"
•Is "pressure" lamp on?
•
Is there any rice or any other alien
substance on the temperature sensor or
the bottom surface of the inner pot?
•
Check the rated Voltage?
•Is the current time correct?
•Is AM or PM set properly?
•Did you set the reservation time over 13
hours?
•Did you clean it after cooking?
•Is the inner pot correctly inserted in the main
body?
•Is the Lock/Unlock handle on the top cover
set to "Lock"?
•Is there hot food in the inner pot?
•Is it the sound of cooking relay?
•Did you wipe the moisture of bottom of
inner pot?
Do the following
•Please insert inner pot.
•This product is AC 110V only.
•
Please turn the "Lock/Unlock" handle to "Lock".
•
Clean all the alien substance on the temperature
sensor or the bottom surface of the inner pot.
•Unplug power and contact customer service.
•It is normal to get "
" when putting only
water.
•This is only for AC 110V.
•Set the current time.
•Check the AM and PM.
•Maximum reservation time is 13 hours.
(Refer to page 43)
•Please clean it after cooking.
•properly insert the inner pot.
•Please turn the "Lock/Unlock" handle to "Lock".
•Pull the pressure handle to aside once.
•It is normal that the "tick, tick" sound of relay is an
on and off operation.
•The moisture of the bottom of the inner pot may
cause "tick, tick" sound.
Please wipe the moisture.