Grundfos PHP A-1 4.0 Instruction Manual page 22

PHP A-1 Instruction Manual / Operation and display
Operating hours Entire degassing time up to now
Current operating mode of the
Operating mode
degassing acc. to menu "settings"
("as per timer prog.", "always
enabled", "Off")
Timer program
Display shows the enable times for
degassing (3 different timer blocks
possible for every day of the week)
only displayed in operating mode "as
per timer prog."
Sensor T2 Current temperature at sensor T2
only displayed if "sensor T2" was
activated in menu "settings"
DISPLAY LEVEL... (2) MONITORING:
Display shows all monitors values. Monitoring is activated
by entering limits (e.g. "min. press. P1min" or "max. temp.
T1max") in user level 3.
Also the current status is displayed: "OK" or "Status: Alert"
only displayed of at least one value is monitored
and accessible from user level 3.
DISPLAY LEVEL... (2) STATISTICS:
Display shows operating hours, maximum values, minimum
values etc.
This function provides a possibility for systematic monitoring
of decided operating states over defined periods (resettable).
DISPLAY LEVEL... (2) GENERAL:
• current software version
• current time and date
• set type/model of the device
• current status of the enable contact "On" or "Off"
DISPLAY LEVEL... (2) SMS MODULE:
For more information see instruction manual of the
SMS module.
22