Transfer Charging Assembly - Canon NP6412 Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM
B. Transfer Charging
Assembly
1. Removing the Transfer Charging
Roller
1) Open the machine's top unit.
2) Remove the screw [1].
3) While freeing the claw [2] of the bushing,
detach the transfer charging roller [3].
Caution:
Do not touch the surface of the roller. Be
sure the surface is free of dirt.
4-38
COPYRIGHT © 1999 CANON INC.
[2]
CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
Figure 4-307
[3]