Canon NP6412 Service Manual page 280

CHAPTER 9 INSTALLATION
Step
8
Fit the shipping attachments [1] and [2] de-
tached in step 5 back to the machine.
Shipping attachment [1]
Tape the machine's top unit in place to pre-
9
vent it from opening.
10 Place A4/LGL copy paper on the copyboard
glass, and close the copyboard cover; then,
tape it in place. (Copyboard type only)
Raise the ADF. Then, place two parts used as
packaging so that they fit closely around both
sides and the front of the ADF, as shown in the
diagram, and secure them with tape. (ADF
type only)
11 Gently lower the ADF and secure the main
unit by taping in eight places, as shown in the
diagram. (ADF type only)
Pack the machine, using the original packing
material and box.
Or tape the machine's top in place so that it
will not open while in transit.
9-22
COPYRIGHT © 1999 CANON INC.
Work
Shipping attachment [2]
CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Checks and remarks