Invalidating Transfer Of A License - Canon MF9100 Series Service Manual

Pcl printer kit-ak1
Table of Contents

Advertisement

A license option confirmation example
To check the validation of license option, see the SPEC REPORT. The details according to the list shown below.
Item Name
Color Universal SEND

4.3.3 Invalidating Transfer of a License

Invalidating Transfer of a License
Situation where this service mode is used
This service mode is used to invalidate a license under the assumption that, when a device is exceptionally replaced with another one due to a trouble (caused by
the device), the license is transferred to another device. This operation is called "invalidating transfer of a license". Since it is possible to select the same device as
a destination of the transfer, this service mode can be also used to invalidate a function on a temporary basis. Careful attention, however, is required because, if you
invalidate a function by mistake, you need to contact a sales company for recovery.
Procedure to invalidate transfer
When invalidating transfer of a license, it is necessary to invalidate the license by entering the service mode and issue a function invalidation certificate key, which
certifies that the license has been invalidated. This operation can be executed for each optional function. At the point when a function invalidation certificate key
is issued, the function is invalidated and becomes unavailable. When you report this function invalidation certificate key, the serial number of the transfer origination
device, the serial number of the transfer destination device, and the reason why you need to perform the transfer to a sales company, a new license key is issued for
installation for the transfer destination device. Be sure to write down the new license key when you receive it and, when it is registered in the transfer destination
device successfully, inform the user of the new license key and explain him/her to keep it at hand.
Operation Procedure
(1) Enter the service mode and display the following service mode. (Press one key at once to enter the service mode in the order of "Main, 2, 8, Main".)
F-4-12
T-4-1
License Name
Status/Optional Setting
BW-SEND
ON/ON
CL-SEND
ON/ON
Chapter 4
0025-5330
4-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

9300 series

Table of Contents