Canon NP6412 Service Manual page 219

4. After Replacing the Composite
Power Supply PCB
1) If you have replaced the composite power
supply PCB, be sure to enter the values
indicated on the PCB to '34' and '35' in
service mode.
COPYRIGHT © 1999 CANON INC.
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
120V 230V
34
PW
OFST
35
IP
ADJ
Composite power supply PCB
Figure 7-332
7-25