Machine Settings Mode (50); Counter Mode (60) - Canon NP6412 Service Manual

CHAPTER 4 SERVICE MODE
E.

Machine Settings Mode (50)

1) Press the +/- key to select an item, and press the Copy Start key.
• The setting will flash.
2) Press the +/- key to change the setting.
3) Press the AE key to store the new setting.
• The setting will stop flashing, and remain on.
4) As necessary, press the Clear/Stop key to return to item selection.
Notation
50 Copy count upper limit setting
51 Density adjustment mode at
power-on
F.

Counter Mode (60)

1) Press the +/- key to select an item, and press the Copy Start key.
• The counter reading will be indicated.
2) As necessary, press the Clear/Stop key to return to item selection.
Notation
60 Counter for the drum unit
currently in use
61 Counter for the most recent
drum unit
62 Counter for the second most
recent drum unit
Reference:
When '74' (installation toner stirring mode under 'U7" of user mode) is executed, the counter
reading entered under '73' (preceding mode) will be entered to item 60. The counter readings so far
retained will shift to represent their respective previous drum units.
(In other words, the count reading entered when executing 'U7' will be for item 60; count
reading for item 60 will be for item 61; count reading for item 61 will be for item 62; count reading
for item 62 will be deleted.)
4-6
Item
The upper limit may be between 1 and 100.
Setting: 0 to 99
Select AE mode or manual mode for density
adjustment at power-on:
• 0: AE
• If other than '0', manual mode.
Table 4-4
Item
Unit: 1000 (sheets)
Unit: 1000 (sheets)
Unit: 1000 (sheets)
Table 4-5
Description
(If set to '0', however, the upper limit will be 100.)
Description