Table of Contents
Advertisement
1
Specifications > Specifications > License configuration of the printer option > How to confirm the activated printer option license:
License configuration of the printer option
All printer options are license options.
BOOT ROM can be used commonly for the same model.
Replacement of BOOT ROM is not required for addition of the printer option.
■ The host-client relationship of the printer option:
The printer options are the PCL, PS and Direct print.
Printer option to use
UFR II
PCL
PS
In order to use UFR II, PCL, the memory capacity must be SOC:1025MB.
In order to use PS the memory capacity must be SOC:1536MB.
■ How to handle the license option of which multiple functions are
integrated to 1 license:
Conventionally in the Send option, in case of integration of multiple functions into 1 license
option, multiple license certificates for each function had been packed with the machine.
Inactivation of the license transfer had been available for each function.
Such license option product as [UFR II+PCL] or [PCL+PS] has 1 integrated license certificate.
Registration of 1 license information concurrently activates multiple functions such as [UFR
II+PCL] or [PCL+PS].
Inactivation of the license transfer inactivates the transfer of all the activated printer options
collectively.
No separate transfer inactivation is available.
Separate inactivation of the license from the service mode screen results in the NG message.
■ Notabilia with regards to the license transfer inactivation:
In the standard option settings for the host machine, due to the lack of transfer inactivation
information, no license transfer to the other host machine of the same model is available.
[Invalidating the License for Transfer to a Different Device] can only license option.
Ex.1
The host machine A is the one which employs UFR II as a standard.
The newly-purchased host machine B is a copier-only one.
1
Specifications > Specifications > License configuration of the printer option > How to confirm the activated printer option license:
Required function
UFR II
UFR II + PCL
UFR II + PCL + PS
T-1-2
Want to change the host machine B to a printer model by transfer inactivation of UFR II
license in the host machine A.
->In this case, as there is no transfer inactivation information in the host machine A, the
license cannot be transferred to the host machine B.
Ex.2
The host machine A is a copier-only machine. The UFR II option was purchased to register
the license information.
The newly-purchased host machine B is a copier-only one.
Want to change the host machine B to a printer model by transfer inactivation of UFR II
license in the host machine A.
->In this case, as there is a transfer inactivation information in the host machine A, the license
can be transferred to the host machine B.
■ How to confirm the activated printer option license:
The options displayed by selecting [counter confirmation key > device configuration
confirmation] for the users in the operation panel are individual functions (such as UFR II+
PCL), not the names of the purchased options.
Consequently, the license certificate is the only way to see the combination of options.
Enter the service mode level 2 and go to the service mode described below. Then the license
condition is displayed and transfer inactivation can be executed.
Copier>Option>LCNS-TR
The field No.1 in the table below shows the activated/inactivated condition of UFR II, PCL,
and PS in the service mode.
*.marked service code must be used for the license transfer inactivation. Other operations do
not work appropriately.
PCL Printer Kit-AE1, PS Printer Kit-AE1
ST-LXUFR
ST-PCL
1*
ST-PS
1*
1
Shows the UFR II installation condition.
Shows the PCL installation condition.
Shows the PS installation condition.
1-3
T-1-3
1-3
Advertisement
Table of Contents
