Canon NP6412 Service Manual page 260

CHAPTER 9 INSTALLATION
II. UNPACKING AND INSTALLATION
When a piece of metal is brought in from a cold to warm place, droplets of water tend to form
on its surface. This phenomenon is known as "condensation" and, in machines, can cause blank
copies.
If the machine has been brought in from a cold place, leave it alone at least for one hour before
starting to install it.
A. Unpacking and Installation
1. Setting up the Machine
Step
1 Take out the machine and the attachments
from the shipping box, and check to make sure
that none is missing:
2 Remove the packaging bag and all fixing tape.
Remove the shipping attachment [1] (gold-
3
colored screw) from the left of the machine
9-2
COPYRIGHT © 1999 CANON INC.
Work
CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Checks and remarks
• Cassette
• Copy tray
• Power cord
• ADF auxiliary tray (ADF type only)
• User's Manual
• Manual feed tray (for some areas only)
• Language label for cassette (included with
universal cassette)
• Language label for ADF (ADF type only)
• Label
Shipping attachment [1]
You will be storing the shipping attachment
[1] inside the machine in step 10.