Canon NP6412 Service Manual page 449

4) Lead the shorter end [6] under the No. 1 mirror mount [8] and the No. 2/3 mirror mount [9];
then, hook it on the left rear pulley [10] and the pulley [11] of the No. 2/3 mirror mount.
5) After fitting the shorter end [6] on the cable hook [12], secure its end with adhesive tape [13].
Be sure that the secured end of the cable is found where the hole in the left side plate and the tip
of the cable matches.
CHAPTER 2 STANDARDS AND ADJUSTMENTS
[11]
[10]
Figure 2-20
[13]
[6]
Figure 2-21
[9]
[8]
[6]
[12]
2-13